Dillon 1050 Starlight Installation Instructions
- Remove the powder drop from the tool head, then remove the tool head from press.
- Slide the light module over the 3 dowel pins as shown in the picture.
- Secure the light to the tool head using the clips provided. Make sure the dimples on the two smaller clips are secured in the holes on the light module.
- Reassemble the tool head and powder drop onto the press.
- Plug the switch into the light and the power adapter into the switch. Leave some slack in the cable so it can move freely up and down with the tool head.
- Plug in the power adapter and activate the switch to turn on the light.